When connecting to the eGauge AP with a Samsung device, the browser will not launch automatically as it does with other devices. After connecting to the eGauge AP via Wifi, click the Settings icon next to the network name, then click on Manage Router. At this point the browser should launch and you may continue with connecting to the local WiFi network.
If the 'Manage Router' option is not available on your device, you can attempt to connect to the eGauge by opening your browser and entering the IP address: 10.234.193.42 or follow the next steps to force the Manage router option to display.
Forcing the Manage Router option on Samsung devices
Step 1: Connect to the AP as usual.
Step 2: Tap the gear icon for the connected AP network, then tap the 'Forget' icon at the bottom of the screen.
Step 3: Reconnect to the AP and choose 'Always connect' when the 'Internet may not be available' screen comes up.
Step 4: Click the Gear icon again and the 'Manage router' option should be there. Tap it to launch the eGauge interface.
